How to Play Connect the Dots

This guide explains how to play Connect the Dots on our site: a path puzzle in which pairs of matching dots must be joined by lines that never cross and together cover the entire grid. You will find the rules, the controls and the solving techniques that turn guessing into reasoning.

Play now

The goal

Connect each dot to the other dot of the same colour and symbol. When every pair is joined and no empty cell is left, the puzzle is solved.

The grid

The board is a square grid of cells. Easy is 5 × 5 with 4 to 6 pairs, Medium is 7 × 7 with 6 to 9 pairs, and Hard is 9 × 9 with 8 to 12 pairs. Choose the size in the New game dialog. Larger boards take a moment to prepare, and a short Preparing puzzle message appears while that happens.

Each colour has its own symbol, which helps if two colours look alike. The bar shows Pairs, the number of linked pairs out of the total, and Filled, the share of the grid already covered.

Drawing paths

  1. Press on a dot and drag. The path follows your finger or mouse from cell to cell, horizontally or vertically, never diagonally.
  2. Reach the matching dot to complete the pair.
  3. To extend an unfinished path, start dragging from its loose end.
  4. To shorten a path, drag back along it.
  5. If your path runs through another colour's line, that line is cut where you crossed it. Redraw it afterwards.
  6. Each stroke, from pressing down to letting go, counts as one move.
  7. Watch the Pairs and Filled counters in the bar as you go; they show at a glance what is still missing.

Winning

The game ends the moment all pairs are linked and every cell is filled. If the pairs are joined but empty cells remain, a message tells you to fill every cell: some path must take a detour through them. Any arrangement that obeys the rules counts as a win, even if it differs from the generator's own solution.

There is no score in this puzzle. The Victory screen shows your time and moves.

Solving techniques

  • Edges and corners first. A dot in a corner has only two directions to go, and paths along the border block nothing on the outside.
  • Neighbours are easy. Two dots of the same colour side by side are usually linked directly.
  • Follow forced cells. If an empty cell has only one neighbouring path that could reach it, that path must go through it.
  • Avoid enclosed pockets. A path that seals off an area with no dot pair inside leaves cells that can never be filled.
  • Long pairs go round. When two pairs compete for the same gap, the pair with more distance between its dots usually takes the outer route.
  • Fill late, link early. First link every pair in the simplest way, then stretch the paths to cover what is left.

A worked example

Imagine an Easy 5 × 5 grid with a red pair in the two top corners, a blue pair side by side in the middle of the left edge, and a green pair near the bottom. Blue is the easy start: its dots touch, so you join them with one short drag and leave them alone for now.

Red sits in two corners of the same edge, so the natural route runs straight along the top border. Draw it there; it takes a whole row without blocking anything inside. Green can now reach its partner only through the middle of the board, and once it is joined you will usually see a few empty cells left over.

Those leftover cells are filled by stretching a neighbouring path. If two empty cells sit beside the blue line, drag blue out from one dot, loop through them and back. This habit of linking first and stretching later solves most boards on Easy and Medium.

Common mistakes

  • Drawing the shortest possible path for every pair and then finding a block of empty cells nobody can reach.
  • Cutting through other paths by accident while dragging quickly.
  • Leaving a single empty cell between two parallel lines; only a bend can fill it.
  • Starting in the crowded middle instead of the edges.

Glossary

  • Dot: an end point. Every dot has exactly one partner.
  • Pair: two dots of the same colour and symbol.
  • Path: the line you draw between a pair.
  • Loose end: the unfinished end of a path that you can keep drawing from.
  • Filled: the share of cells covered by paths.

FAQ

What does the hint do?
After a short video it draws one complete, correct path for you.
Is there only one solution?
Our puzzles are checked so that, nearly always, exactly one full solution exists. Any valid fill is accepted.
Does undo remove a whole path?
Undo reverts your last stroke, whatever that stroke changed. It counts as a move.
Where can I play?
Open the Connect the Dots page for a fresh grid. If you like path puzzles, the Maze is a good next step.

More games

Privacy settings

Choose which optional cookies and similar technologies we may use. You can change this at any time with the “Privacy settings” link at the bottom of every page.

Strictly necessaryAlways on

Keep your saved games, sound and language settings and this choice on your device. Always on, because the site cannot work properly without them.

Anonymous statistics that show us which games and pages are used, so we can improve them.

Lets Google and its partners use cookies to personalise ads and measure them. If this is off, you may still see ads, but they won't be based on your interests. Turning it off also opts you out of the “sale” or “sharing” of your personal information.