How to Play Light Up

This page explains how to play Light Up on our site: the rules, the controls and the patterns that make even an 11 × 11 grid fall into place. The puzzle is a quiet one, all about light, shadows and careful elimination.

Play now

The goal

Place lamps on white cells so that every white cell in the grid is lit, no lamp is lit by another lamp, and every numbered black cell has the right number of lamps beside it.

The rules

  • A lamp shines in all four directions along its row and column, stopping at the first black cell or the edge of the grid.
  • A white cell counts as lit if any lamp shines on it, or if it holds a lamp.
  • No lamp may shine on another lamp.
  • A numbered black cell, 0 to 4, must have exactly that many lamps in the four cells that share a side with it. Diagonal cells do not count.
  • An unnumbered black cell places no limit on lamps around it.

Levels

Choose a size in the New game dialog: Easy is 7 × 7, Medium 9 × 9 and Hard 11 × 11. Easy keeps many numbers on the black cells, Medium fewer, and Hard only those that are truly needed for a unique solution. The black cells always form a symmetrical pattern.

Marking cells

  1. Tap a white cell once to place a lamp. Its light spreads along the row and column.
  2. Tap it again to change the lamp into a dot, your note that this cell stays dark.
  3. Tap a third time to clear the cell.
  4. To mark many cells, press and drag: this paints dots or clears cells, but never places lamps.
  5. Use undo if you change your mind; it keeps a long history.

Feedback and winning

Lamps that light each other are flagged straight away. A numbered cell that has too many lamps, or can no longer reach its number, is marked, and one that is satisfied shows as done. There is no mistake counter.

When every cell is lit and all rules hold, the Victory screen shows time, moves and score. The score depends on time and grows with the grid size.

Logical patterns

  • Zero: put dots in all four neighbours of a 0.
  • Full numbers: a 4 always has four lamps around it. A 3 with one side blocked by a wall or black cell has lamps on the other three, and a 2 in a corner has lamps on both open sides.
  • Lonely cell: if a dark white cell can only be lit from one place, because every other cell that could light it is dotted or blocked, put a lamp there.
  • Shared light: a lamp lights its whole row and column segment, so every other cell in those segments gets a dot for free.
  • Count down: once a number has all its lamps, dot its remaining neighbours.

A worked example

Imagine a black 3 sitting against the left edge of the grid. It has only three side neighbours: above, below and to the right. A 3 there needs a lamp in each of them, so place all three at once. Their light now runs up, down and across, and every white cell in those segments can be dotted.

Next, suppose a black 0 stands two cells to the right of that 3. Dot its four neighbours. Look at the white cell between the two black cells: it is already lit by the lamp to the right of the 3, so nothing more is needed there. Further along, a white corridor might now have just one undotted cell from which it can be lit. That cell must hold a lamp, and placing it lights a new row, which forces more dots. Most grids unravel in exactly this chain: a sure number, its dots, then a lonely cell, then the next number.

Common mistakes

  • Counting diagonal cells for a number. Only the four side neighbours count.
  • Assuming an unnumbered black cell means zero lamps.
  • Forgetting that a black cell blocks light, so lamps on opposite sides of it are allowed.
  • Placing lamps on hunches; a single wrong lamp can light a whole corridor and hide the real solution.

Glossary

  • Lamp: the light source you place.
  • Dot: a mark for a cell that has no lamp.
  • Lit: reached by the light of a lamp.
  • Clue: a number on a black cell.
  • Segment: an unbroken line of white cells between black cells or edges.

FAQ

What does the hint do?
After a short video it corrects a wrong lamp or dot, with a short message, or else places a lamp that logic forces.
Why can't I drag lamps?
Dragging paints only dots or clears cells, so you cannot scatter lamps by accident. Place lamps with single taps.
Is there exactly one solution?
Yes. Every puzzle is generated so that only one arrangement of lamps works.
Where can I play?
Open the Light Up page for a fresh grid. If you like this style, try Tents.

More games

Privacy settings

Choose which optional cookies and similar technologies we may use. You can change this at any time with the “Privacy settings” link at the bottom of every page.

Strictly necessaryAlways on

Keep your saved games, sound and language settings and this choice on your device. Always on, because the site cannot work properly without them.

Anonymous statistics that show us which games and pages are used, so we can improve them.

Lets Google and its partners use cookies to personalise ads and measure them. If this is off, you may still see ads, but they won't be based on your interests. Turning it off also opts you out of the “sale” or “sharing” of your personal information.